Using a Chinese operation interface, the operation is simple and easy to understand.

Equipped with CCD positioning system, automatic vision positioning compensation, correction of board advance deviation.

Large size carrying rail, suitable for PCB boards of various sizes.

The non-contact high-speed injection valve realizes the continuous movement of the dispensing head and high efficiency.

The high reliability and consistency of dispensing brought by the use of injection valves, as well as high productivity and material utilization rate

Real-time monitoring of glue amount, automatic prompt for low glue amount

The valve body has an automatic constant temperature function to ensure the fluidity of the colloid.

The opening and closing time of the glue valve is controlled at the millisecond level to achieve a high degree of consistency in the amount of glue.

Online visual programming, using visual trial teaching method and CAD map method programming

Programs are automatically invoked, production is started quickly, and manufacturing is intelligent.

For different products (such as disc, straight line, dot matrix), you can freely dispense glue

X and Y axes are driven by high-performance linear servo motors to ensure high positioning accuracy under high-speed work

With signal interface for entering and exiting the board, other equipment can be connected to realize production line-up

Configure industrial control system with high-capacity and high-speed SSD, high-speed access to ensure system response speed

Product parameters:

1. Model: HT－D12

2. Maximum support board width: 1200×300mm

3. Maximum operating speed: 1200mm/s

4. CCD resolution: 0.01mm

5. Operation accuracy: 0.001mm

6. Heating temperature: 200 degrees

7. Dispensing rate: 90000 per hour

8. Transmission mode: direct drive by linear servo motor

9. Software: Independently developed control software (including automatic vision positioning correction system)

10. Dimensions: 1800×1050×1500mm

(Note: The actual speed and accuracy vary depending on the customer's product)